Yosemite Lakes, CA
Auto Collision Shop in Yosemite Lakes That Shows You the Why Behind Each Repair
Our auto collision shop handles collision repair, dent repair, paint and refinishing, bumper repair and frame straightening. Before we touch your car, we show you what broke, why it broke and what each fix involves. Drivers bring vehicles to us from Coarsegold, Oakhurst and the surrounding foothills.
- Lifetime paint work warranty
- Damage photos before work
- Line-item written estimates
- Honest repair-or-replace answers

How a Repair Runs at Our Shop
You bring your car to us, and we keep you informed from inspection to pickup.
- 1
Inspection and photos
We look over the damage, check panel gaps and lights, and photograph everything. Then we go over what we see and what still needs a closer look.
- 2
Written estimate
You get a line-item estimate with parts choices noted. If an insurance claim is involved, we send the same documentation to the adjuster.
- 3
Teardown and supplement
We remove damaged panels to find hidden damage. Anything new gets photographed and added to the estimate with your approval, and the insurer's if they are paying.
- 4
Structure, body and paint
Structural repairs come first, then panel work, primer, color matching and clear coat in a controlled booth. Sensors are checked or calibrated where your car needs it.
- 5
Final check and pickup
We test lights, doors and gaps, clean the car, and walk you through what we did and why before you drive away.
Auto Body Repair Services We Handle
A crash rarely damages just one thing. A bumper cover hides an impact absorber and a reinforcement bar, and a door ding can stretch the metal around it. We handle collision repair, dent repair, bumper repair, frame straightening, and paint and refinishing, and we help you with the insurance claim that pays for it. All paint work that leaves our booth is backed by a lifetime warranty.

Collision Repair
Repair after a crash, from the bumper reinforcement to the final clear coat, with each step and each part explained before the work begins.

Dent Repair
Door dings, hail marks and creased panels, repaired at our shop with paintless methods where the paint allows or conventional bodywork where it does not.

Paint and Refinishing
Peeling clear coat, faded panels, scratches and rock chips refinished with matched base coat and new clear, backed by a lifetime warranty on paint work.

Bumper Repair
Cracked, torn or pushed-in bumper covers repaired or replaced, with the foam absorber, brackets and sensors checked behind them.

Frame Straightening
We measure bent frames and unibody structures against factory dimensions, pull them back to spec and show you the before and after numbers.

Insurance Claims
We write a line-item estimate, document hidden damage for the adjuster and explain every line of your insurance claim in plain English.
Drivers We Serve Around Yosemite Lakes
Our shop is in Yosemite Lakes, CA, and drivers bring their vehicles in from across the area. We regularly see cars from Coarsegold, Oakhurst, Bonadelle Ranchos and North Fork, as well as Madera Acres, Madera Ranchos, Auberry, Parksdale, Clovis and Madera.
- Yosemite Lakes
- Coarsegold
- Oakhurst
- Bonadelle Ranchos
- North Fork
- Madera Acres
- Madera Ranchos
- Auberry
- Parksdale
- Clovis
- Madera
All repairs happen at our shop, so plan on bringing your car in for the inspection. Our Service Areas page lists the towns we see most often.

About Our Shop
We are an auto collision shop in Yosemite Lakes, and we work on the cars our neighbors drive every day: commuters, trucks, family SUVs and the older vehicles people keep running for years. Our approach is simple. Most drivers do not know what a quarter panel, a unibody or a blend panel is, and nobody should have to sign off on a repair they do not understand.
So we explain. We point to the bent reinforcement bar, show you the cracked mounting tab, and tell you why a dent near a body line is harder to fix than one in the middle of a door. Hot, bright foothill summers are hard on clear coat, so we also tell you how to keep the new finish looking right. You leave knowing what was wrong with your car and what we did about it.
- Warranty
- Lifetime warranty on all paint work
How We Work on Your Car
Most drivers only visit a body shop once every few years, so the terms are new. We explain every step of the repair in plain English and let you make the call.
We show you what is behind the panel
Once a bumper cover or fender comes off, we photograph the brackets, sensors and inner structure. You see the same hidden damage we see, and the estimate makes sense.
Repair or replace, with the reason
A panel with a shallow dent and intact paint can often be repaired. A panel with torn metal, a kinked body line or a crushed edge usually cannot. We tell you which one you have and why.
Parts choices laid out
OEM parts come from your vehicle's maker. Aftermarket and recycled parts cost less and fit differently depending on the part. We lay out the options for your car so the choice is yours.
Estimates written line by line
Each line names the part, the labor and the paint materials. If we find more damage during teardown, we stop, show you, and update the estimate before going further.
Measured, not eyeballed
After a hard hit we measure the frame or unibody against factory dimensions. Panel gaps that look fine can still sit on a structure that is out of spec.
What Moves the Price of a Repair
Two cars with a similar dent can end up with very different estimates. The difference usually comes from what sits under the paint and how the vehicle was built. Here is what we look at.
We put the estimate in writing after inspecting your vehicle, with parts, labor and materials listed separately. If teardown turns up more, we show you photos and revise it before continuing.
- Hidden damage under the cover
- Plastic bumper covers flex back into shape after a hit. The foam absorber, reinforcement bar and mounting tabs behind them often do not. Teardown tells us what is really broken.
- Sensors and driver-assist systems
- Many newer cars have radar, parking sensors or cameras in the bumper and windshield area. Replacing or moving them can mean calibration so the system reads the road correctly.
- Panel material
- Aluminum panels need different tools and more time than steel, and some high-strength steel parts must be replaced rather than straightened.
- Paint type and blending
- Tri-coat pearls and metallic colors take more steps to match. We often blend new color into the next panel so the change in tone does not show in daylight.
- Structural work
- If the unibody or frame shifted, setup on the bench, pulls and measurements add labor before any cosmetic work begins.
- Parts availability
- Some parts arrive in days, others take longer. Wait time does not change the labor, but it can change when your car is ready.
Common Questions About Your Repair
- Can I pick my own body shop, or does the insurer decide?
- You pick. California lets the vehicle owner choose where the car gets fixed. An insurer can suggest a shop from its network, but it cannot require you to use one. We work with the adjuster on photos and paperwork either way.
- Why did the estimate change after you took the car apart?
- A first estimate covers what is visible. Once the bumper cover or a fender comes off, we often find cracked brackets, a bent reinforcement bar or a damaged sensor. We photograph it, show you, and update the estimate before doing that work.
- What is the difference between OEM and aftermarket parts?
- OEM parts are made by or for your vehicle's manufacturer. Aftermarket parts are made by other companies and usually cost less, with fit and finish that vary by part. We tell you what your policy covers and what we would recommend for each part.
- Do you offer a warranty on paint?
- Yes. All paint work we do carries a lifetime warranty. If something about the finish on your car concerns you after the repair, bring it back in and we will look at it with you.
- Will the new paint match the rest of my car?
- We match using your vehicle's paint code, then adjust with spray-out test cards because factory color varies from car to car. On metallic and pearl colors we often blend into the next panel so the transition is not visible.
- My car still drives fine. Could there be frame damage?
- It is possible. Signs include uneven panel gaps, doors that close differently, a steering wheel that sits off center, or tires wearing unevenly. We measure the structure against factory dimensions so you know rather than guess.
- When can I expect my car back?
- The schedule comes down to what teardown uncovers and how quickly the parts show up. Structural pulls on the bench and sensor calibration add their own time on top of body and paint work. After the inspection we give you a working ready date, and we call you if a back-ordered part or newly found damage pushes it back.

Find Out What Your Car Needs
Tell us what happened and we will tell you what to expect next, from inspection to the insurance claim. Then bring your car in so we can show you the damage up close.